DLP bulbs can be used in all sorts of different types of visual technology including devices such as projectors used in offices and theaters to home televisions. Home DLP TV bulbs make up the majority of the DLP bulbs available. There are a wide variety of replacement bulbs on the market that can be purchased to replace yours when its lifespan is over. You can easily replace the burned out bulb in your TV or projector for a fraction of the cost of replacing the electronics device itself if you do a little bit of research and replace the DLP TV Bulbs.
DLP TV bulbs and lamps are what keep the picture on your television bright and vibrant. When the bulb starts to fade you will notice that the picture becomes dull and eventually the picture will be completely gone when the bulb dies. While some people may resort to replacing their TV when this happens, you can often just replace the bulb to resolve the issue which can save you hundreds of dollars.
The quickest way to find out what type of DLP bulb replacement your TV takes is to check the owner’s manual that came with it. If you discarded your manual or can’t locate it, you can check online using your television’s manufacturer and model to see what type of DLP TV bulb you need. You can also check the back of your television set to see if it is listed or even check the old bulb for a model number. (Hint: after replacing your bulb, affix a label to the back of your television with the bulb model number)
To find the old bulb, look at the back of your television and locate the panel that can be removed by unscrewing the cover. Carefully unscrew and remove the panel and you should find the bulb in some type of square shaped box. More often than not, the model will be listed on the outside of that box. If you are replacing the bulb in a projector then you should be able to find it behind a similar panel as well.
Once you know what type of DLP TV bulb you will need, you can order them online at a trusted merchant, such as the ones on this page, or find an electronics parts store in your area. Since these types of parts can be fairly expensive, be sure to compare prices and find the best deal possible. If you have more than one of the same type of TV or projector you may also want to see about bulk pricing to see if you can get a discount by buying more than one DLP TV bulb replacement. This way, you will always have one on hand in emergencies (read: Superbowl Sunday!).
After you receive your bulb, installation is fairly simple. Return to the panel you removed when looking for the model number of the bulb, remove it again, dust the insides carefully with a microfiber cloth and switch out the two bulbs. Important: Do NOT touch any part of the new bulb with your bare hands. If you transfer any oil onto the bulb, it may not work. It is important to make sure your TV or projector is cool when doing this as well so you may need to let it sit in a powered down state for about half an hour.
By taking the time to get the proper replacement DLP TV bulb, you can effectively save yourself hundreds of dollars by simply replacing your burned out DLP bulb instead of buying a entirely new device. If you notice the picture from your projector or television starting to go dim, remember that bringing back the vibrancy of your high definition television is as easy as replacing a bulb.